NEW DOORS
TECHNICAL DETAILS
Traditionally made to the highest standards we can manufacture new timber door-set to meet your individual requirements. However our standard details are listed below.
Please view our product magnifier and drawing of a single entrance door set to identify each component part.
TECHNICAL SPECIFICATIONS
Door types
French doors
Double or single entrance doors
Front doors
Timber
European oak
Accoya™
Profile
Standard Ovolo moulding to door frame and door
Minimum door thickness 53mm
Glazing (new doors)
Double glazed (Document L and EN 1279 compliant)
Internal 4mm low E toughened glass
Cavity Argon filled
External 4mm toughened float up to 6.8mm
Double glazed units bedded into silicone mastic, timber edge bead to the exterior bedded and pinned into silicone mastic
Single glazed
6.4 laminate glass bedded into silicone mastic faced with putty
Door surrounds (complete door-sets only)
Standard 75mm Ogee architrave
Glazing bars
Double glazed
Internal bars 20mm width Ovolo profile
External bars 20mm hard wood putty line profile, bonded to the glass
Single glazed
20mm with Ovolo profile
Paint finish
Basecoat primer / preservative, undercoat and top coat, semi gloss, factory applied finish
Draught sealing
Full perimeter draught sealing with gasket fitted into door frame
Standard furniture and assembly
French doors and single doors
3 x 100m brass butt hinges per door leaf
5 - point (high security) multi point locking system with operated cylinders
Front doors
3 x 100mm brass or chrome butt hinges per door leaf
5 lever dead lock
High security Yale latch lock
Brass or chrome letter plate with back plate
Brass or chrome door knob
