CASEMENT WINDOWS
TECHNICAL DETAILS
Traditionally made to the highest standards we can manufacture any type of casement window to meet your individual requirements. However our standard details are listed below.
Please view our product magnifier and drawing to identify each component part.
TECHINICAL SPECIFICATIONS
Window Types
Side hung and top hung
Window hung on butt hinges
Fixed casements
Non-opening, fixed
Direct glazed glass
Glazed direct to the frame
French casements
Two sashes meeting with no centre mullion
Timber
European oak
Accoya™
Profile
Standard TSWW Ovolo moulding to casement frame and casements
Casements to be flush fronted
Glazing
Double glazed (Document L and EN 1279 compliant)
Internal 4mm Low E glass
Cavity Argon filled
External 4mm float or up to 6.8mm
Double glazed units bedded into silicone mastic, hard bead to the exterior, bedded and pinned into silicone
Single glazed
4mm float glass bedded into silicone mastic faced with putty
Paint finish
Basecoat primer / preservative, undercoat and top coat, semi gloss factory applied finish
Glazing bars
Double glazed
Internal bars 20mm width Ovolo profile
External bars 20mm hardwood putty line profile bonded to glass
Single glazed
20mm width Ovolo profile
Draught sealing
Full perimeter draught sealing with gasket fitted into frame
Furniture and assembly
Traditional
2 x 75mm brass or white hinges per opening casement
Brass teardrop locking handle
Brass teardrop casement stay to match
Brass flip over lock
Contemporary
2 x 75mm brass or white hinges per opening system
Three point multi locking system
Brass locking handle
Friction stay
Window surrounds
(new windows only)
Standard 75mm Ogee architrave
50mm bullnose window board
